This Ruland setscrew shaft collar is constructed of aluminum. It is a setscrew-type shaft collar for applications supporting low axial loads and simple positioning. Setscrew collars have improved holding power when the shaft material is softer compared to the setscrew material. It is manufactured from aluminum for level of resistance to corrosion and tarnishing and can be lightweight for make use of in applications where material weight is a concern. This collar includes a forged setscrew for securing the collar onto the shaft. The operating temperature ranges for this collar range between -40 to 107 degrees C (-40 to 225 degrees F). This shaft collar is suitable for use in various applications, which includes in the auto industry to situate components in car power steering assemblies, the manufacturing industry to locate elements on a conveyor belt program, and the hobby craft industry to hold wheels on axles in remote control vehicles, among others.
Shaft collars are ring-shaped devices primarily used to secure parts onto shafts. They also serve as locators, mechanical stops, and spacers between other components. The two simple types of shaft collars are clamping (or split) collars, which come in one- or two-piece designs, and setscrew collars. In both types, one or more screws hold the collars set up on the shaft. In setscrew collars, screws are tightened aluminum collar china through the collar until they press directly against the shaft, and in clamping collars, screws are tightened to uniformly compress the collar around the shaft without impinging or marring it. Setscrew collars and one-piece clamping collars should be installed by sliding the collar over the finish of the shaft, while two-piece clamping collars individual into two halves and can be installed between parts on the shaft. Shaft collars are produced from a wide range of materials including zinc-plated steel, light weight aluminum, nylon, and neoprene. Within nearly every type of machinery and market, shaft collars are used in applications including gearbox assemblies, motor bases, machine equipment, drive shafts, agricultural implements, medical apparatus, and paper and metal mill equipment, among others.
Ruland manufactures shaft collars, rigid couplings, and zero-backlash motion control couplings including beam couplings, bellows couplings, Oldham couplings, curved jaw couplings, and miniature disc couplings. The company, founded in 1937, and headquartered in Marlborough, MA, complies with Restriction of Hazardous Substances (RoHS) and Registration, Evaluation, Authorization, and Restriction of Chemicals (REACH) standards.
· Setscrew shaft collar for applications supporting low axial loads and basic positioning
· Effective on shafts made of softer material compared to the setscrew material
· Aluminium for resisting corrosion and tarnishing
· Includes a forged setscrew for securing the collar onto the shaft
· Operating temperatures range between -40 to 107 degrees C (-40 to 225 degrees F)

When you need to replace your existing flagpole flash collar this 2 piece collar makes installation easy. No need to remove the pole or to go over the top of the pole. This 2 piece cast aluminium collar has a hidden hinge within the collar therefore no rivets or screws are in view.
The heavy-duty 2 piece Cast Aluminum Collars is the the majority of durable collar offered on the market today! Cast from Aluminum Alloy, these 1/4″ heavy cast collars are made to endure the harshest of environments. replacement or addition to a preexisting flagpole.
I.D. around 1/8″ wider than Butt Diameter.
Aluminium Decorative Pipe Collar – 5 inch Fuel Type: Gas, Liquid Propane. Inner Diameter: 5″. Width: 10.625″. Double Wall Construction. UL Listed. This Decorative Pipe Collar for 5 Inch Type B Pipe from the Round Gas Vent series is certainly a Type B gas component and consists of the duralock system for a good seal. This pipe collar can be an optional accessory. It is to be used for decorative purposes. EPT Type B Gas Vent is made to meet the rugged demands of the job site. The inner wall structure is recessed to get rid of damage in handling. EPT’s innovative system for a lock-limited connection for Type B Gas Vent called DuraLock. See the alignment indicators meet; feel the ends grasp collectively; hear the snap as the connection firmly locks into place. Type B gas vents aren’t suitable for make use of with wood-burning or coal applications, commercial ovens, exhaust ranges and hoods, grease or pollution ducting, or as free-position exhaust vents for high temperature applications. Type B Gas Vent provides been engineered to warmth up quickly. It remains hot during the operation of the appliance with minimal condensation in the appliance and vent system. Pipe lengths are available in multiple lengths, 6 to 60 inches, with a full enhance of adjustable and rigid fittings. Looking for Simpson Dura-Vent? You discovered it! Simpson Dura-Vent provides transformed their name to EPT. EPT is an established technological leader in the venting industry. Consistently the first ever to marketplace with new improvements in venting systems, EPT offers captured a leadership placement in emerging marketplaces. EPT provides patents for several products and continues to create secure and technologically advanced venting. The company’s research into solving issues with corrosion, when biofuels such as for example corn are used, led to the break-through patent for PelletVent Pro. Scientifically confirmed materials and unequalled engineering make EPT products not only the best choice, or safest choice, but the only choice for professional quality venting items.
When you need to replace your existing flagpole flash collar this 2 piece collar makes installation easy. No need to remove the pole or to go over the top of the pole. This 2 piece cast aluminum collar includes a hidden hinge underneath the collar therefore no rivets or screws are because.
The heavy-duty 2 piece Cast Aluminum Collars may be the most durable collar offered on the market today! Cast from Aluminium Alloy, these 1/4″ solid cast collars are made to endure the harshest of environments. alternative or addition to an existing flagpole.
Our spun light weight aluminum flash collar can be an ornamental covering that provides a finished look to the bottom of the flagpole. It also conceals and helps guard your ground sleeve from the elements. Prices proven below are for the typical bright satin finish. Our flash collars are also available in anodized and various other finishes upon ask for. Please call for availability and pricing.
The Style B Spun Collar is our most popular design flash collar for shoe base flagpoles and is manufactured to exacting specifications from the highest quality components. This flash collar supplies the perfect finishing touch for your flagpole. For Use With Shoe Base Flagpole Applications