Worm Gear Swiftness Reducers: Double Reduction
Ever-Power. manufacturers double double reduction gear reducer Reduction Worm Gear reducers that are built to last. Double decrease units are created with the same high quality elements as the single reduction Worm Gear reducers.
Double Reduction Worm Gear Acceleration Reducer Features
Cost effective
High Reduction: 75:1 – 3600:1 and higher
C-face input or sound shaft input
Mix of two single reduction reducers
Solid or hollow end result shafts available
Several varieties of bolt-on bases available
Substantial tensile strength cast bronze worm wheel and a hardened and surface alloy steel worm made integral with the shaft for lengthy and trouble-free life
All cast iron construction
9 Products: I, IC, IS, ICS, IM, IMS, ISF, ICSF, IMSF
Double Reduction Worm Gear Rate Reducer Applications
Conveyors
Packaging Machinery
Cranes/ Hoists/Winches
Mixers/ Agitators
Shipping & Delivery
JIT delivery
Standard shipping: 3-4 days
Same/next day shipping on stock goods at no additional
cost
Dual reduction gearing mechanism is employed in big machinery and automotives where in the speed must be lowered at a essential level. For eg if the source speed is usually 2000rpm and the output acceleration desired is certainly 300rpm a reduction gearing device is used for instance a reduction gear package. However in case of twice reduction mechanism, the reduced amount of speed occurs in 2 steps. Primarily the input from the engine shaft has a pinion mounted onto it through couplings. This pinion equipment is then linked to an intermediate equipment which is first decrease gear. This equipment is then connected to another low rate pinion on another shaft. This low acceleration pinion is linked to the second reduction gear which is attached on the propeller shaft which is the output.
Greaves Double Reduction Acceleration Reducers are two stage worm reduction systems. A specifically designed primary worm reduction unit is integrally attached on a typical single decrease Greaves worm reducer which varieties the next stage. The composite devices provide the most small and rigid set up for large reduced amount of speed necessary for slower moving machinery. A wide variety of ratios upto 4900:1 is available.
The wormshafts are constructed of high quality case hardening steeL accurately generated, ground and superfinished. The wormwheels comprise of phosphor bronze centrifugally cast rims of substantive sections welded to rigid centres. Considerable flexibility of shaft layout is certainly permissible with all types of Double Reduction units
Ever-Power Double Decrease Worm Gearboxes happen to be two level worm reduction units.
A especially designed primary worm decrease product is integrally mounted about a standard single reduction AGNEE worm gearbox which forms the next stage. The composite units provide the most compact and rigid arrangement for large reduction of speed necessary for slower shifting machinery. A wide range of ratios up to 4900:1 is available.
Double Reduction Worm Gear Container Sizes Available with us are 40, 50, 60, 75, 85, 100, 125, 150, 175, 200, 250, 300, 350, 430.
Nominal Gear Ratios: 100:1, 150:1, 200:1,300:1, 400:1, 600:1, 750:1, 1000:1, 1200:1, 2000:1, 2800:1
Nominal ratios listed certainly are a typical selection of commonly employed ratios from the entire range of Ever-Power Dual Reduction Worm Gear Box. Information on other ratios available on request.
Under Driven / Over Driven / Vertical Input or Output Shaft Release / Shaft Mounted Version / All sorts with motor installation adaptor /
motor – optional
The worm shafts are constructed of top quality case hardening steel, accurately generated, ground and super finished. The worm tires comprise of phosphor bronze centrifugally cast rims of significant sections welded to rigid centers. Considerable flexibility of shaft layout is certainly permissible with all types of Double Reduction products.
Product Description
The merchandise are widely applied in the making equipments of a myriad of industries domestic and overseas. They will be the best options for nowadays modern facilities of mechanical reducing travel control to recognize large twisting distance, large gear ratio, low noises, high productivity and low temperature.
Description:
Customized high quality double worm gear velocity reducer aluminium gearbox lowering gearbox with electric motor
Ratio:
7.5,10,15,20,30,40,50,60
Color:
Blue, Silver Or when customer’s requirements
Noise:
low noise (<50DB)
Advantage:
Excessive Efficience and low noise and low temperature
Material:
Housing: Die-Cast Aluminum Alloy
Worm Gear-Bronze 9-4#
Worm-20CrMnTi with carburizing and quenching, surface area harness is 56-62HRC
Shaft-chromium steel-45#
Packing:
Carton and Wooden Case
Bearing:
C&U Bearing
Seal:
NAK SKF
Warranty:
One Year
Input Power:
0.06kw, 0.09kw, 0.12kw, 0.18kw, 0.25kw, 0.37kw, 0.55kw, 0.75kw, 1.1kw, 1.5kw, 2.2kw, 3kw, 4kw, 5.5kw, 7.5kw, 11kw, 15kw
Usages:
Industrial Machine: Food Products, Ceramics, Chemical, Packing, Dyeing,
Wood working, Glass.
IEC Flange:
56B5, 56B14, 63B5, 63B14, 71B5, 71B14, 80B5, 80B14, 90B5, 90B14, 100B5, 100B14, 112B5, 112B14, 132B5, 160B5
Lubricant:
Synthetic & Mineral