Fan Motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Explanation: New fan motor, taken off unused 18” or 24” China Surroundings Compressor diameter TPI fans. Made to operate an 18” or 24” enthusiast blade (blade NOT included).
This motor has a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All the wiring in the middle of your electric motor, capacitor and quickness control change is still installed nevertheless the cord itself is generally detached as observed in the photos. (Discover “Control Notice” below for change type.)
T (See “Program Notice” below for make use of in various other applications.)
Measurements: The engine body is 5” diameter and 3 ½” long (excluding the shaft). The engine shaft is usually½” (0.500″) diameter x 2 ½” lengthy with a collection screw even. There are (4) threaded mounting lugs on the front of the motor, ½” long x .16 dia. with washers and nuts. The studs may actually ‘ve got 4mm threads and to become on a 117mm (4.6”)diameter circle (3 ¼” measured in one stud to the next).
Rate: The approximate engine speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Path of rotation (facing the shaft end of the electric motor) is Clockwise.

Control Take notice: Motors may come with The 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we have demonstrated BOTH variations in the images). Both of these types of switches both control the engine just as (but you have a rotating knob and you have got a pull-chain). If you order several electric motor at a time, we will do our best to supply your order with each one sort of control or the additional.
Application Note: Do NOT use this electric motor in a nonfan software. This is a completely enclosed fan electric electric motor and made to have constant ventilation over the electric motor casing for cooling. The housing isn’t vented and the electrical engine will overheat and get into Electric Fan Motor automatic thermal overload if operate in a nonfan plan where there isn’t solid ventilation past the motor. (Caution Note: the electrical motor will restart immediately when it cools back off.) Using this electric motor for applications aside from 18 & 24″ TPI fans may possibly also overload the motor and lead it to proceed into automated thermal overload. (Your companion blade from another manufacturer may have a steeper blade angle.)
Origin: This electric engine is manufactured in China.