Flexible plastic gear racks in 0.8 Mod (32DP) pitch. These racks can provide an easy to install rotational drive of up to approx 270 degrees for instance on camera focus bands. They also provide an economical remedy where a huge gear is required or an extended stretch (up to 2 metres) of linear movement is preferred. These racks are appropriate for our 0.8 Mod and 32 DP pitch Spur Gears.
EVER-POWER stock racks are made for high precision linear motion applications. You can expect a large selection of racks ranging from module 0.5 to 10 and lengths from 100 to 2000 mm.
Hardened Floor Racks (MRGF – MRGFD) : Has the highest power and precision in the EVER-POWER regular rack series. Bolt holes could be remachined as carburizing can be applied just within the tooth area. J Series items are also available.
Hardened Floor Racks (KRGF-H – KRGFD-H) : High temperature treated surface gears with high precision and power has excellent cost-overall performance ratio. J Series items are also available.
Hardened Racks (KRF-H/KRFD-H) : This is a strong rack manufactured from Chromoly steel, treated simply by carburizing. Has high-power, high wear resistance, and enables downsizing of SR racks. J Series products are also available.
Hardened Racks (SRF-H/SRFD-H) : Stable Hardened racks with high strength, long life span are affordable. J Series products are also available.
Thermal Refined Ground Racks (KRG – KRGF – KRGD) : High strength and abrasion-resistant for precision linear motion.
Metal Racks w/ Machined Ends (SRAF – SRAFD – SRAFK) : This gear rack gets the same tooth elevation and face width sizes, more compact and reasonably priced in comparison to SRF Racks
Steel Racks (SR) : Low cost, large choices of modules and amount of the teeth. J Series items are also available.
Steel Racks w/ Machined Ends (SRF) : Low cost, large choices of modules and number of teeth. J Series items are also available.
Racks with Bolt Holes (SRFD – SRFK) : Low priced, large selections of modules and quantity of teeth. J Series items are also available.
Stainless Steel Racks (SUR•SURF•SURFD) : Ideal for food machinery because of SUS304 material\’s rust-resistant quality.
Plastic-type material Racks (DRF/DRFD/DRFK) : Plastic racks with little dimensional change, absorb lesser water than MC Nylon racks. J Series products are also available.
Plastic-type Racks (PR•PRF) : Made form MC nylon, can be used without lubrication.
Brass Racks (BSR) : Small pitch racks manufactured from free-slicing brass, excellent workability and high rust resistance.
Steel Circular Racks (SRO – SROS) : Convenient in applications where the rack gets the reciprocal movement. S Type is simple to install.
Stainless Steel Circular Racks (SURO) : Same dimensions as SRO racks, except in stainless steel. Use where rust-resistance is necessary.
Floor Helical Racks (KRHG – KRHGF – KRHGFD) : Excellent items with high precision and strength, and low noise and abrasion characteristics.
Metal Helical Racks (SRH – SRHF – SRHFD) : Effective in reducing noise and vibration because of larger contact ratio of helical gears.
Molded Versatile Racks (DR) : Found in applications due to its flexibility, where steel racks do no have this attribute. Pinions and add-ons are also available.
Molded Versatile Rack Clamps (SRS) : Utilized to secure Molded Versatile Racks.
Molded Flexible Rack Pinions (SSDR) : Spur pinions used for molded flexible racks.
Flexible Rack Instruction Rails (ARL) : Guideline Rails for Molder Flexible Racks.
You can expect as standard an array of Racks in Metric and Imperial sizes. Spur Racks can be found in Steel (En8) and up to 2 metres long. Stainless Steel and Delrin (Plastic) Racks are created with Spur and Helical tooth forms, square and round sections up to 400mm long. Alternative materials can be found on ask for. Moulded Hostaform Racks can be found to offer a cost-effective alternative where much less torque is required.
Variable stiffness can improve the capacity for human-robot interacting. Based on the mechanism of a versatile rack and equipment, a rotational joint actuator named vsaFGR can be proposed to regulate the joint stiffness. The versatile gear rack can be regarded as a combination of a nonlinear elastic element and a linear adjusting system, providing advantages of compactness. The joint stiffness is certainly in the number of 217-3527 N.m/rad, in fact it is inversely proportional to the 4th-purchase of the apparatus displacement, and nearly independent from the joint angular deflection, providing advantages of quick stiffness regulation in a short displacement of 20 mm. The gear displacement with regards to the flexible equipment rack is certainly perpendicular to the joint loading force, so the power necessary for stiffness regulating is as low as 14.4 W, providing benefits of energy saving. The high compactness, great stiffness range and low power price of vsaFGR are proved by simulations and experiments.
Flexible plastic equipment racks in 0.8 Mod (32DP) pitch. These racks can provide an easy to install rotational drive of up to approx 270 degrees for instance on camera focus bands. They also offer an economical option where a huge gear is required or an extended stretch (up to 2 metres) of linear movement is desired. These racks are appropriate for our 0.8 Mod and 32 DP pitch Spur Gears.
EVER-POWER share racks are created for high precision linear movement applications. You can expect a large collection of racks ranging from module 0.5 to 10 and lengths from 100 to 2000 mm.
Hardened Floor Racks (MRGF – MRGFD) : Has the highest strength and precision in the EVER-POWER regular rack series. Bolt holes could be remachined as carburizing is certainly applied just within the tooth region. J Series items are also available.
Hardened Ground Racks (KRGF-H – KRGFD-H) : Temperature treated surface gears with high precision and strength has excellent cost-overall performance ratio. J Series products are also available.
Hardened Racks (KRF-H/KRFD-H) : This is a strong rack manufactured from Chromoly steel, treated by carburizing. Has high-power, high wear resistance, and allows downsizing of SR racks. J Series items are also available.
Hardened Racks (SRF-H/SRFD-H) : Steady Hardened racks with high power, extended life span are affordable. J Series items are also available.
Thermal Refined Ground Racks (KRG – KRGF – KRGD) : High strength and abrasion-resistant for precision linear motion.
Steel Racks w/ Machined Ends (SRAF – SRAFD – SRAFK) : This gear rack has the same tooth height and face width sizes, more compact and reasonably priced in comparison to SRF Racks
Steel Racks (SR) : Low priced, large choices of modules and number of teeth. J Series products are also available.
Metal Racks w/ Machined Ends (SRF) : Low priced, large selections of modules and quantity of teeth. J Series products are also available.
Racks with Bolt Holes (SRFD – SRFK) : Low priced, large choices of modules and quantity of teeth. J Series items are also available.
STAINLESS Racks (SUR•SURF•SURFD) : Ideal for food machinery due to SUS304 materials\’s rust-resistant quality.
Plastic-type Racks (DRF/DRFD/DRFK) : Plastic racks with small dimensional change, absorb lesser water than MC Nylon racks. J Series items are also available.
Plastic-type Racks (PR•PRF) : Produced form MC nylon, can be utilized without lubrication.
Brass Racks (BSR) : Small pitch racks manufactured from free-trimming brass, excellent workability and high rust resistance.
Steel Circular Racks (SRO – SROS) : Convenient in applications where the rack has the reciprocal motion. S Type is simple to install.
Stainless Steel Round Racks (SURO) : Same dimensions as SRO racks, except in stainless steel. Make use of where rust-resistance is required.
Floor Helical Racks (KRHG – KRHGF – KRHGFD) : Excellent products with high precision and strength, and low sound and abrasion characteristics.
Metal Helical Racks (SRH – SRHF – SRHFD) : Effective in reducing noise and vibration due to larger contact ratio of helical gears.
Molded Versatile Racks (DR) : Used in applications because of its flexibility, where steel racks do no possess this attribute. Pinions and components are also available.
Molded Flexible Rack Clamps (SRS) : Used to secure Molded Flexible Racks.
Molded Versatile Rack Pinions (SSDR) : Spur pinions used for molded flexible racks.
Flexible Rack Information Rails (ARL) : Guide Rails for Molder Versatile Racks.
You can expect as standard a wide variety of Racks in Metric and Imperial sizes. Spur Racks can be found in Steel (En8) or more to 2 metres in length. STAINLESS and Delrin (Plastic-type) Racks are created with Spur and Helical tooth forms, square and circular sections up to 400mm long. Alternative materials are available on demand. Moulded Hostaform Racks are available to offer an economical alternative where much less torque is required.
Variable stiffness can enhance the capacity for human-robot interacting. Based on the mechanism of a flexible rack and gear, a rotational joint actuator named vsaFGR is proposed to modify the joint stiffness. The flexible gear rack could be regarded as a mixture of a nonlinear elastic element and a linear adjusting mechanism, providing benefits of compactness. The joint stiffness is in the number of 217-3527 N.m/rad, in fact it is inversely proportional to the 4th-purchase of the apparatus displacement, and nearly independent from the joint angular deflection, providing benefits of quick stiffness regulation in a brief displacement of 20 mm. The gear displacement with respect to the flexible equipment rack can be perpendicular to the joint loading force, so the power required for stiffness regulating is as low as 14.4 W, providing advantages of energy saving. The high compactness, great stiffness range and low power price of vsaFGR are proved by simulations and experiments.