The EP Greenhouse Gearbox is a concise and lightweight reduction gearbox with a limit switch Gear motors for Greenhouse system that is ideal for assembly of a locally available electric electric motor. The Gearbox is utilized in manually-managed or climate-controlled ventilation and screen systems in greenhouses. The quick and easy-to-installEP Gearbox is certainly rainproof and windproof. The Gearbox includes a high protection class (IP65) and can be used in an ambient temperature of 0-60 °C.

The low-noise Gearbox for Greenhouse includes a gearwheel transmission and a worm wheel transmission, which are integrated in an aluminium precision housing. The self-braking worm wheel transmission ensures that the drive shaft is certainly locked when the reduction gearbox is not running. The fully sealed reduction gearbox has an growth chamber with a diaphragm to keep the gear essential oil at a low pressure under all situations, even at high temperature ranges. Thanks to the utilization of an expansion chamber, the Gearbox could be installed in any placement. There are no restrictions, since there is no dependence on a bleed connect. The sealed reduction gearbox keeps the apparatus oil of the Gearbox in optimal condition because of its entire operating life time. The Gearbox is suitable for discontinuous use, working class s3-30%, with a maximum activation time of 25 minutes.

The Gear box reduction gearbox has an FT85 motor assembly flange, to which the right IEC standard motor can simply be installed (EN 50347).

The Gear box has a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off by the end positions. The limit change system is installed in an built-in chamber and is enclosed by an impact-resistant plastic cover. The limit switch system is accessible and easy to adjust. The limit change system’s maximum switching range is 40 or 64 revolutions of the drive shaft. The cabling is connected in spring-clip connections. The Gearbox has an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.

The Gearbox for greenhouse comes with 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates can be found as accessories.

Maximum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in the event of app of 4-pole electric motor.
Protection class IP65.
Can be used in ambient temperatures of 0-60°C.
Suitable for discontinuous use, operating class s3-30%, optimum activation time 25 a few minutes.
Equipped as regular with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installing IEC regular motor (EN 50347).
Maximum switching selection of limit switch system 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).