“H” CLASS Refuse Drag Chains can be used for conveying sawdust,wooden chips, pulp, garbage, tankage, ashes, and other abrasive spend through either wooden or metal troughs. Because of its huge, wide opening area, “H” CLASS Refuse Drag Chain provides sizeable transporting capacity when operated at moderate speeds.
The front face of every barrel is flat, providing a wide area to push material along the trough and to keep the chaim from riding over the top of the material. The rounded internal part of the barrel is carefully shaped to make excellent sprocket contact. Sidebars are reinforced with wearing sneakers which provide both
additional wearing surface area and stiffening for the link. A vertical member on each sidebar assures added link rigidity and defends the pin from harm.
“H”CLASS Refuse Drag Chain comes in EVRT-POWER Promal or Duramal with a tensile strength selection of 36,400 to 52,000 pounds. This Transmission Chain durable working chain comes in a pitch range of 5.000 to 8.000 inches. Each hyperlink is stated in accordance with manufacturer’s criteria and may end up being interchanged with links made by various other chain manufacturers. “H”CLASS Refuse Drag Chain comes in riveted construction only. Grease chambers, cored into each link’s barrel, hold grease which lubricates pins.
Wide faced sprockets, either of machined or cast steel, are recommended for”H” course Refuse Drag Chain operation. Links should always be operate in the direction of the closed barrel.