The gear boxes are made from stainless, except from the insight flanges which are made of anodized aluminum. Safety class IP65 is regular – IP67 obtainable as choice – which is acheived using a patented insight sealing and a patented output sealing system.
Standard backlash is merely 5 respectively 7 arc-minute (1 resp. 2 stages), reduced backlash is just 3 / 5 arc-min (option) and lastly micro backlash is only one third1 / 3 arc-min (option).
This means that the actual backlash at a particular load is a lot Reduced an APEX gear box than in virtually any other planetary gear box on the market.
Gearboxes provide torque multiplication, speed reduction, and inertia matching for motor-driven systems. Servo systems, particularly, require gearboxes that may supply not merely high torque with low added inertia, but also high precision and stiffness. One type of gearbox meets all these requirements while providing relatively lengthy operating life with low maintenance requirements: the planetary gearbox.
A planetary gearbox includes multiple planetary gears that revolve around a central sunlight gear while engaging with an interior gear and rotating on their own axes. The continuous engagement of the planetary gears means the load is usually shared by multiple tooth, allowing planetary designs to transmit high torque loads.
This load sharing among teeth also gives planetary gearboxes high torsional stiffness, planetary gearbox for servo motor making them ideal for processes that involve frequent start-stop motions or changes in rotational direction, which are common characteristics of servo applications. Most servo applications additionally require very precise positioning, and planetary gearboxes are designed and manufactured to possess low backlash, with as little as 1-2 arcmin in some cases.
Planetary gearboxes can use spur or helical gears. While spur gears can have got higher torque ratings than helical gears, helical styles have smoother operation, much less noise, and higher stiffness, making helical planetary gearboxes the favored gearbox for servo applications.
When a gearbox is added to the drivetrain, the rotational acceleration delivered from the electric motor to the driven component is reduced by the amount of the gear ratio, which can allow the program to make better usage of the servo motor’s speed-torque characteristics. Planetary gearboxes are able to accept high input speeds and provide speed reduced amount of up to 10:1 for standard designs, with high-speed designs providing equipment ratios (and, therefore, rate reduction) of 100:1 or higher.
Planetary gearboxes can be lubricated with either grease or oil, although a planetary gearbox for servo use (sometimes known as a “servo rated” or “servo” gearbox) is frequently lubricated with grease. In either case – grease or essential oil lubrication – planetary gearboxes tend to be lubricated for the life of the gearbox by the product manufacturer, which eliminates maintenance for the end user.
The most important advantage of utilizing a gearbox in a servo system is arguably its influence on the inertia of the strain. The load inertia, which is definitely reflected to the motor, is decreased by the square of the apparatus ratio. So a good relatively small gear reduction can have a significant effect on the inertia ratio.
The right angle planetary gearbox with output shaft combines the benefits of a compact correct angle gearbox and the ones of a typical planetary gearbox.

With its versatile installation options, our right angle gearboxes provide intelligent drive solutions with a concise machine concept. The result shaft gives correct angle planetary gearboxes the advantage of a proven and dependable component for the proper angle tranny of torque and velocity.