All EPT shaft collars, including quick-clamping collars, are single point faced to make sure perpendicularity and proper alignment. This critical manufacturing stage assures specific shaft collar confront to bore relationship resulting in correct element positioning on the shaft and actually pressure on interfaced elements.
Quick-clamping shaft collars from EPT are manufactured from high quality aluminum with type-II sulfuric anodized finishes, with a black finish on the collar and a precious metal finish on the clamping lever for added visibility. Aluminum collars are corrosion resistant, lighter than additional metals, have low inertia and have nonmagnetic properties. All EPT products happen to be RoHS and REACH compliant. Available normal sizes for the quick-clamping shaft collars are 0.375” to 1 1.5” in the ” series and 8 mm to 38 mm in the metric series.
Shaft Collar, System of Measurement In ., Shaft Locking Type – Couplings 1 Piece Speedy Clamp, Bore Type – Collars Ordinary Bore, Bore Dia. 3/8 In., Material – Collars Black Anodized 6061 Aluminum, Exterior Dia. 1-1/2 In., Width .394 In., Clearance Dia. 1.496 In., Screw Size M3, Screw Material 18-8 300 Series Stainless Steel, Operating Temp. Selection -40 Degrees to 200 Degrees F, Specifications RoHS2 Compliant, REACH Compliant
The Shaft Collar 1×3/8, 1/2″ for Key Shaft is constructed of lightweight Aluminum, both piece design enables you to install these collars anywhere on a shaft without removing components. In addition to reducing the overall weight, the flats allow you to rotate a shaft without marring or gouging the shaft. Just place the collar on the shaft and tighten both socket-head cap screws to protected the collar and a wrench and be added to the collar’s flats to rotate the whole shaft/collar assembly.
Made of lightweight Aluminum
Enables you to install these collars anywhere on a shaft without removing components
Easily place the collar in the shaft and tighten both socket-head cap screws to secure the collar
Flats let you rotate a shaft without marring
Climax Part C-056-S Arranged Screw Collar is manufactured with T303 STAINLESS, which works well in corrosive environments. Measurements will be 9/16 in. Bore, 1 in. OD, 7/16 in. Width. It is powerful on hard and delicate shafts. It is a Affordable collar design, and Without difficulty installed where major disassembly would usually be required.
EPT speedy clamping shaft collars collar clamp hinge acquire manufacturing 2 1 8 in metal,shaft collar clamp drive manufacturing metal vex clamping design,vex clamping shaft collar collars a single part with lever clamp hinge,vex clamping shaft collar clamp 3d model manufacturing quick 1 3 8 in alum,EPT quick clamping shaft collars collar clamp 2pc 1 in steel stainless split with lever,climax metallic s shaft collar two part clamp style EPT speedy clamping collars 2computer 1 in steel force,clamp upon shaft collars couplings universal clamping collar design with mounting holes 2pc 1 in metal,shaft collar clamp power clamping calculation quick hook up collars at best price in,clamp shaft collar clamping collars power calculation speedy connect,stainless steel twice split shaft collar with speedy clamping clamp hinge power calculation.
Black Oxide Plated Metal One-Piece Clamping Collar.
Recessed Screw Head provides an outside surface free of key projections for safety.
Design totally engages the shaft without marring.
Greater axial holding electrical power than placed screw collars.
Effective on hard & soft shafts.
Indefinitely adjustable and Shaft Clamp simple to remove, one-piece clamping collars are typically applied to hard or soft standard round shafts, more than a split hub or in thin wall tube. Through the use of friction to supply superior grip on pubs and shafts, single split collars give sturdier, more trustworthy results when compared to the set screw design of solid collars. They also offer tremendous axial electricity, while reducing shaft distortion for superior performance and decreased wear and tear.

The collar clamping mechanism works fast and successfully with simple hand opening of the integral clamping lever, positioning the collar on the shaft, and closing the lever flush with the outer area of the collar. The look of the cam on the lever and the mating machined area on the collar assure a good fit with a maximum axial load of 35 to 120 lbs / 133 to 489 N based on the collar bore size. In conditions where higher holding ability is normally or clamp axial load is required, the quick-clamping collar is not the recommended decision. EPT offers a accomplish type of industry-leading one-part and two-part shaft collars designed for these applications.