Weld-On Hubs are available in 3 styles to suit the user’s preference for bushing installation types. They will be stocked for work with with:
TB Bushings
QD Bushings
DST Bushings
All MasterDrive Weld-On Hubs are machined from metal.
Weld-On Hubs are commonly used with plate type sprockets and conveyor pulleys to supply for more shaft engagement.
Are manufactured to simply accept Taper Lock Bushings. Two types are available. Type S and Type W. Type S provides for a shorter duration through the bore, and Type W a more identified registration flange to aid with positioning and concentricity for welding.
Are manufactured to accept a QD design flanged bushing.

Accepts DST-Twice Split Taper style bushings.
These bushings are keyed to both shaft and hub. The exterior key provides positive drive without torque on the cap screws. DST bushings allow for the highest torque carrying capability.
The nitro weld on hubs are bored to size hubs that can be utilized with weld on sprockets, pulleys as well as custom applications. All of our hubs are an “X series” hub, which means they’re compatible with any “x series” sprockets or pulleys. Sprocket X hubs can be purchased in finished bore, square bore, hex bore, idler and splined bore. Bore sizes range from 1/2″ ID up to 1-1/2″ ID. The Nitro weld on hubs are made from 1045 CD (cool drawn) steel and completed with a black oxide coating.
Weld-On Hubs are created from steel, drilled, tapped and taper bored to receive Tapered
Bushings. They are incredibly valuable for welding into pulleys, plate sprockets, impellers,
agitators and several other devices which must be firmly fastened to the shaft.
Weld-about hubs are constructed with 1015-1025 steel, drilled, tapped and taperbored to receive the taper-lock bushing. They are of help for welding into admirer rotors, pulleys, plate sprockets, etc., which must be firmly installed onto shafting. Four types of hubs are available from stock.
Weld-on hubs are created from low carbon steel once and for all welding compatibility. They are useful for welding into supporter rotors, impellers, agitators, etc., which require secure mounting to the shaft. A typical type is available in addition to one which is specifically made for use in the end disc of a conveyor pulley.
Type S Taper-lock – actually created for use in small sprockets, now suited to many other lighter-duty applications
Type W/WA Taper-lock – rugged, full-duration size for single-hub, heavy-duty applications
Type F – includes a larger flange diameter which can be welded into standard steel tubing to fabricate conveyor pulleys or perhaps process rolls
Type K – smaller sized design and style, especially useful for two-hub engineering, such as conveyor pulleys Taper-lock bushings
Both are constructed of steel material with rugged, compact patterns to accommodate most bushings sizes.
Ever-Power is a reliable distributor of precision weld-on hubs. Weld-on hubs can be utilized for welding to produce “B” or “C” style sprockets and for different applications. Distinctive dimensional hubs can be found per your technical specs on a made-to-buy basis.
Manufactured from Metal to provide a convenient methods to secure fan rotors. Metal pulleys, platewheel sprockets, impellers etc. to a shaft. The Shouldered outer diameter permits easy position. Taper bored to match taper lock bush sizes 1210-5050.
Chain & Drives share the complete range of Weld-On Hubs to check our coupling, pulley and sprockets stock in a nutshell reach and prolonged reach models. They might be used in assisting the application of taper suit bushes to melt your apparatus to a driven shaft.
Taperfit or perhaps QD weld-on hubs happen to be for employ in the fabrication of conveyor pulleys, plate sprockets, followers and impellers. Weld-on hubs are constructed of low carbon steel for good welding compatibility.

Weld-about hubs are made of 1015-1025 steel, drilled, tapped and taperbored to get the Taperfit bushing. They are of help for welding into supporter rotors, pulleys, plate sprockets, and should be firmly mounted onto shafting. Four types of hubs are available.
Weld on hubs can be found in many different designs such as: stock bore, surface finish bore, Q-bushed, taper-bushed, and BM-bushed. These hubs are made from bar steel and used for welding to create “B” design sprockets that include inventory bore, finished bore, and also styles of bushed sprockets. Particular hub dimensions are available per your technical specs on a made-to-buy basis.