900 SERIES PINTLE CHAINS, sometimes referred to as “sugar mill” or “intermediate carrier chain” is utilized extensively in sugar mills. Multiple strands of 900 Pintle Chain, available with a couple of holes per link, could be fitted with overlapping beaded carrier slats to form a continuous apron conveyor for intermediate carrier provider.
The pin holes at the closed end of the 900 Class hyperlink are provided with smooth bushings which are press-fitted into the links and keyed into place. The bushings are renewable and can be driven out and replaced if they become worn. 900 Class Pintle Chain was created with dual barrels, one on each part of the open end of the links, to accommodate double sprockets. The purpose of this driving method is to eliminate the possibility of materials build-up in the sprocket get in touch with area, which frequently causes the chain to jump the sprocket. Large ribs rigidly reinforce these traveling barrels.
Our 900 Course chain links, with tensile strength from 22,500 to 32,500 pounds, are available with large sliding areas to Transmission Chain reduce chain wear and prolong chain lifestyle. Broad wearing areas and heavy cross sections team up to provide a considerable link which is made according to manufacturer’s standards and will perfectly replace links made by other manufacturers.
Brutaloy sprockets for 900 Class Pintle Chain are readily available in 3.170 inches. 900 Class Pintle Chain should only be allowed to travel in one direction; links should run in direction of their closed narrow end.
Obtainable in cottered construction just, 900 Class Chain is assembled with T-headed pins which are locked into place by two lugs cast upon the ends of the driving barrels to avoid pin rotation. Pin rotation during procedure would result in wear on the inside of the bushing. Both the mind of the pin and the cottered end of the pin are guarded by cast lugs on the barrel end of the links.
900 Class Pintle Chain are links cast of malleable iron or Promal (Duramal). It is furnished with carbon metal heat treated pins and carbon metal case hardened bushings as regular. However, stainless pins and bushings could be provided when specified.