Precision grade JIS quality N9 (JIS B1702-1: 1998) JIS grade 5 (JIS B1702: 1976)


section of gear Normal plane

Gear teeth Standard full depth


pressure angle 20°

Helix angle 45°

Aluminum-Bronze Screw Gears Material CAC702
① When mating screw gears manufactured from the same material they may trigger abrasion and scoring. It is recommended to mate Screw Gears composed of different materials.

② The allowable torques shown in the table are the calculated values according to the assumed usage conditions.

③ The backlash values shown in the table will be the theoretical values for the backlash in the normal direction of a pair ofidentical gears in mesh.

④ For offset shaft applications, match a RH with a RH, or LH with a LH, to create a group of screw gears. For parallel shaft applications,

mesh opposing hands (RH and LH) of helical gear sets.

⑤ If the bore diameter is certainly significantly less than φ 4, then your bore tolerance class is H8. If the bore diameter is usually φ 5 or φ 6, and the hole length (total size) exceeds three times the diameter, then your class is also H8.