fourteen Collection Weasler PTO Shaft

Specifications of fourteen Collection Weasler PTO shaft

The fourteen sequence weasler PTO Shaft provides reputable service with durable building. The fourteen sequence weasler PTO Shaft yoke features a 1 in. x 1-1/8 in. sound rectangle bore for easy use. Part of fourteen Sequence, this PTO yoke and shaft are designed to meet up with your needs. The PTO tractor yoke operates at up to fifty eight HP for effectiveness.

14 sequence weasler PTO Shaft yoke and shaft to satisfy your demands
Centerline to Conclude of Shaft: 35-2/3 in.
PTO generate shaft yoke features a 1 in. x 1-1/8 in. solid rectangle bore for effortless operation
PTO tractor yoke operates at 58 HP/forty three kilowatts @ 1000RPM or 38 HP/28 kilowatts @ 540RPM for effectiveness
Excess weight: 12.7 lb/6 kilograms
Extension measurement: 25-5/8 in.

Bore one one.37 inches 35 mm
Bore 1 one 3/8-6 SPLINE
Bore two Minus Stop Yoke
Compressed (Shut) Size fifty one.seventy five inches 1314 mm
Compressed Total Length sixty.00 inches 1524 mm
Relationship 1 SPRING-LOK
Link 2 YOKE ARMS
Extended Size ninety.75 inches 2305 mm
Extended Overall Duration 99.00 inches 2515 mm
[electronic mail&#160protected] 48 HP 36 kilowatts
[e mail&#160protected] 28 HP 21 kilowatts
Duration 60.00 inches 1524 mm
Outdoors Diameter seven.31 inches 186 mm
Delivery Dimensions fifty six.06″ L  ×  7.31″ H  ×  7.31″ W 142cm L  ×  19cm H  ×  19cm W
Transport Quantity 2995.63 in3 49090 cm3
Transport Excess weight 33.eighty two kilos 15 kilograms
Fat 33.82 pounds fifteen kilograms

14 Collection Weasler PTO shaft parts

14 Series Weasler PTO shaft implement yoke

&nbsp

 Round Bore

  • 1″ Round Bore (Dim. A)
  • With 1/4″ Standard Keyway and Set Screw
  • one-1/8″ Round Bore (Dim. A)
  • With 1/4″ Common Keyway and Established Screw
Hex Bore
  • one-1/4″ Hex Bore (Dim. A)
  • With Established Screw
  • 1-1/8″ Hex Bore (Dim. A)
  • With Established Screw
Square Bore
  • 1″ Sq. Bore (Dim. A)
  • With Set Screw
  • one-1/8″ Square Bore (Dim. A)
  • With Set Screw
  • 1-3/16″ Square Bore (Dim. A)
  • With Established Screw
  • one-1/4″ Square Bore (Dim. A)
  • With Set Screw

Shear Pin Yoke

  • 1-1/8″ Round Bore (Dim. A)
  • With 1/4″ Pin Hole
  • one-1/4″ Round Bore (Dim. A)
  • With 1/4″ Pin Gap

Other manufacturers and designs of PTO shaft

We can make all these models with good quality assurance

Bondioli &amp Pavesi BY2     BYP4, S4     BY5, S6     BYP6, S7     BYP7, S8, HB     BYP8, S9      BYP10     BYP SH    BYP SO
Walterscheid 2100    2200    2300    2400    2500    2600    2700    2800
Weasler six series     12 series     14 series     35 series     44 series     55 series     77 sequence

We Also Source Agricultural gearboxes

If you also want the agricultural gearboxes, click here:https://www.ever-energy.internet/agricultural-gearbox/

How to remove the caught PTO generate shaft on the gearbox?

  1. Tractors with PTO drive shafts tow all varieties of PTO shaft-pushed implements. When the PTO shaft of the implement is engaged with the PTO travel shaft of the tractor, the shaft rotates a thousand moments for each moment. The PTO shaft supplies mechanical procedure electrical power for the implementation. The male drive shaft on the tractor has splines that match the female drive shaft on the implement. The locking pin or button locks the 2 with each other. You need to have to get rid of the PTO shaft to disconnect the put into action from the tractor.
  2. Area the transmission of the motor vehicle in the parking space. Interact the parking brake and change off the ignition essential. By listening and seeking at the oil force gauge, make confident that the motor is not managing just before climbing out of the vehicle.
  3. Face the back of the tractor, amongst the rear wheels. Check out the relationship position amongst the PTO shaft of the employ and the PTO shaft of the tractor. You will see the basic safety include masking the area.
  4. Attain underneath the basic safety include and really feel all around the device coupling with your fingers. Find the pin or button that locks the axle to the tractor. Push this button or pin with your thumb. Swing the shaft up and down and again and forth until the PTO shaft is separated from the PTO principal shaft of the tractor.
  5. Unfasten all basic safety chains that secure the protect on the axle to the tractor. The PTO shaft is now removed.

warning
By no means get rid of the PTO shaft from a running tractor. If you consider, it may possibly lead to serious injury or loss of life.