All EPT shaft collars, including quick-clamping collars, are sole point faced to make sure perpendicularity and proper alignment. This critical manufacturing stage assures specific shaft collar confront to bore relationship leading to correct component positioning on the shaft and also pressure on interfaced factors.
Quick-clamping shaft collars from EPT are manufactured from high quality light weight aluminum with type-II sulfuric anodized finishes, with a black finish on the collar and a gold finish in the clamping lever for added visibility. Aluminium collars are corrosion resilient, lighter than additional metals, possess low inertia and also have nonmagnetic properties. All EPT goods will be RoHS and REACH compliant. Available typical sizes for the quick-clamping shaft collars happen to be 0.375” to 1 1.5” in the inches series and 8 mm to 38 mm in the metric series.
This EPT two-piece clamping shaft collar is made of black oxide steel. It is a two-piece clamping shaft collar for applications requiring a more robust holding power and bigger axial load capacity than setscrew or one-piece clamping collars. The two-piece design separates into two halves, allowing assembly or repositioning everywhere on the shaft without disturbing existing components. It accommodates a greater variety of shaft diameters than setscrew collars and is effective on both hard and gentle shafts. It is manufactured from steel for weldability and rust resistance with a dark-colored oxide surface finish for a attractive appearance and resistance to white-colored corrosion, chipping and flaking, and stick-slide of the screw during torqueing, bettering the collar’s hold on the shaft. Dark-colored oxide also provides slight corrosion resistance and much better lubricity. This collar includes forged socket-head cap screws for securing the collar onto the shaft. The functioning temperatures for this collar range between -40 to 176 degrees C (-40 to 350 degrees F). This shaft collar is ideal for use in various applications, including in the motor vehicle Clamping Shaft Collars industry to situate parts in automobile power steering assemblies, the making industry to locate components on a conveyor belt system, and the hobby craft industry to hold wheels on axles in handy remote control vehicles, among others.
Allows assembly / disassembly on / off the shaft without the need to remove other ancillary factors. Clamps firmly in place when tightened to the shaft. Perfect for positioning factors such as for example bearings or sprockets onto shafts.
The position is easily adjusted when fitted onto a shaft. Clamps firmly in place once tightened to the shaft. Perfect for positioning parts such as bearings or sprockets onto shafts.
The dual split shaft collar made of steel browned (clamp collar) is simple to attach. The shaft collars usually do not destruction the shaft. Also, they are insensitive to external forces and vibrations and distribute the possessing forces evenly over the whole shaft circumference.
Clamp-style and placed screw shaft collars from Grainger could be indispensable to power transmission. They are able to keep bearings and sprockets on shafts, situate elements in motor and gearbox assemblies and serve as mechanical stops. A two-part clamping shaft collar can certainly wrap around a difficult or soft shaft without marring. Arranged screw collars make use of a cup point socket established screw to lock onto a soft or predrilled shaft.
The collar clamping mechanism works fast and effectively with simple hands opening of the integral clamping lever, positioning the collar on the shaft, and closing the lever flush with the external area of the collar. The design of the cam on the lever and the mating machined surface area on the collar assure a tight fit with a optimum axial load of 35 to 120 lbs / 133 to 489 N based on the collar bore size. In conditions where higher holding power is definitely or clamp axial load is required, the quick-clamping collar is not the recommended choice. EPT offers a complete type of industry-leading one-piece and two-piece shaft collars created for these applications.