Fan Engine, 1/8 hp 120V 2.2 Amp 3-Speed
General Explanation: New fan motor, removed from unused 18” or 24” China Air Compressor diameter TPI fans. Made to run an 18” or 24” enthusiast blade (blade NOT included).
This motor comes with a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All of the wiring between your electric engine, capacitor and quickness control switch is still installed however the cord itself is generally detached as observed in the photos. (Find “Control Notice” below for change type.)
T (See “Program Notice” below for make use of in various other applications.)
Sizes: The engine body is 5” diameter and 3 ½” long (excluding the shaft). The engine shaft is usually½” (0.500″) diameter x 2 ½” long with a collection screw even. There are (4) threaded mounting lugs on leading of the motor, ½” long x .16 dia. with washers and nuts. The studs may actually ‘ve got 4mm threads and to end up being on a 117mm (4.6”)diameter circle (3 ¼” measured from one stud to another).
Rate: The approximate motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Path of rotation (facing the shaft end of the electric motor) is Clockwise.

Control Take note: Motors may come with The 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we have demonstrated BOTH variations in the electric fan motor china images). These two types of switches both control the engine just as (but you possess a rotating knob and you have got a pull-chain). In the event that you order several motor at the same time, we can do our better to supply your purchase with each one kind of control or the additional.
Application Note: USUALLY DO NOT use this electric electric motor in a nonfan program. This is a completely enclosed fan electric electric motor and made to have continuous ventilation over the engine casing for cooling. The housing isn’t vented and the electrical engine will overheat and enter automatic thermal overload if run in a nonfan system where there isn’t solid ventilation past the engine. (Caution Note: the electric motor will restart immediately when it cools back off.) Using this electrical motor for applications apart from 18 & 24″ TPI fans may possibly also overload the engine and lead it to proceed into automated thermal overload. (Your companion blade from another manufacturer may have a steeper blade position.)
Origin: This electric engine is produced in China.