• Motor gearboxes are maintenance-free, small power resources for driving vent, display, house and flap ventilation systems in greenhouses.
• Single phase and three phase options for your own needs.
• Key feature of these drives certainly are a self-braking worm equipment transmission and an integral linear limit switch unit.
shaft-installed gear motors are finish electromechanical drives where the speed of the installed electric motor is reduced to the required value using two to four reduction stages. The drives are powerful and durable and show a compact and lightweight design.
The compact design is manufactured possible through the mixture of a spur/worm gear drive with motors optimized for performance. motors also include a 60 to 70 percent weight-loss compared to commercially offered drive motors. This is achieved through the consistent application of aluminum die casting technology, which ensures a high amount of rigidity for the gear and motor housing simultaneously.
Each drive is produced and tested specifically for each order and customer. A sophisticated modular system permits a great diversity of types and a optimum amount of customization to client requirements.
Thanks to their integrated control units, the shaft-mounted equipment motors will be the ideal drives for applications in reversing mode. In both rotation directions, described end positions are safeguarded by two placement limit switches. This uncomplicated option does not only simplify the cabling, but also makes it possible to configure the end positions efficiently. The high shut-off precision of the limit switches ensures safe operation moving forwards and backwards.
This gearmotor integrates a gearbox, a power motor, and limit switches. It really is connected with a steel shaft to carefully turn the pinions for greenhouse ventilation. With the support of electric panel, it can run and then stop after set number of turns. Then it can open and close the windows for greenhouse ventilation to correct positions.
To keep the delicate environment in the greenhouse, weather control systems certainly are a necessity. Many mechanical systems can be applied in this respect; however glass vent drive systems tend to be the most famous. The drive system contains a central gearmotor linked to a 40:1 right angle reducer with dual output shafts. These OP shafts connect to long jack shafts that spread across the roof line of the greenhouse connecting to multiple rack and pinion mechanisms that open up and close large cup windows panes in the ceiling for temperature control.
Greenhouse Gear Motor Depending on the size of the application form (length of the shafting, volume and weight of the home window panes) we offers two gearmotor solutions from a modified edition of their 200 series parallel shaft line – 1/5 HP and 1/20 HP. The application form Is generally intermittent in use; nevertheless the motors are rated continuous since the glass pane windows could potentially be under constant, subtle adjustment during the day.
Gear Motor, also known as Electric motor Gearboxes, is a particular kind of electrical motor that’s designed to produce high torque while maintaining a minimal horsepower, or low acceleration, motor output. Equipment motors can be found in many different applications, especially for the greenhouse, livestock and agricultural market, our motors can be found options to operate roof vents, wall structure vents,roof shading and screening, they put on the shaft with chain couplings that compensate for alignment mistakes and can be quickly eliminated without disturbing the whole shaft.
shaft-installed gear motors are full electromechanical drives where the speed of the installed electrical motor is reduced to the desired value using two to 4 reduction stages. The drives 
are high performance and durable and feature a compact and lightweight design.