Single and double reduction 
planetary equipment drives to be used with electric, hydraulic, air flow motors or mechanical power input from high velocity, low torque sources to deliver reduced speeds at increased torques. The input side has standard SAE pads for electric motor mounting. Available in the three output configurations demonstrated below. Many units can be furnished with an integral Plastic Gear Rack parking brake.
Single reduction drives are limited by 3500 RPM input; double reduction drives to 5000 RPM. Units with essential parking input swiftness is limited to 2500 RPM.The same torque is available in either direction of rotation. Torque rankings are intermittent. For continuous operation reduce torque ratings to about 1/3 to 1/2 the values shown. Devices provide 95% power transmitting efficiency.
Wheel Drive
Input side has regular SAE pads and splined input. Output side has hub for mounting automobile wheel. Free wheel is possible by using the spring disconnect to disengage the drive shaft. The disengage feature is definitely regular on all wheel drives.
Shaft Output
Input side regular SAE pads with splined insight. Output side options include: Keyed round, hexed, hollow, tapered or splined shaft.
Spindle Drive
Input side is standard SAE pads with splined insight. Output side has a flanged spindle for coupling to the load.
Swing Drives
Ever-Power model 6 is offered with or without integral parking brakes. The “SW” Power Wheel offers extra-large tapered roller bearings, a ductile iron hub and heat treated ring equipment to minimize backlash growth caused by wear. The external bearing nut supplies the supreme in shaft retention and shaft strength. Output could be a spindle shaft or different sizes of integral pinion gears.