Ever-Power Company , announces its right angle NEMA gearbox designed to IP65 specs for use in wash down applications in packaging devices and comparable machinery. Rated backlash is usually 30 arc-minutes with choices for 4 or 8 arc-minutes. The NEMA 34 flanged gearbox has 440C Stainless steel bearings with seals and Nitrile o-rings shaft seals on both insight and output. All fasteners are stainless steel. Hard anodized aluminium or 316 Stainless housings are available. Customizing for apart from NEMA motors or your specific application is very easily done.
This Nema 17 stepper motor with 39mm body and 1.68A rated current, integrated with a 41mm Planetary gearbox of 5:1 equipment ratio. It’s a good solution to applications that with unique space but need low swiftness and/or high torque.
Manufacturer Part Amount: 17HS15-1684S-HG5
Motor Type: Bipolar Stepper
Step Angle: 0.36 deg
Holding Torque without Gearbox: 39Ncm(55oz.in)
Rated Current/phase: 1.68A
Phase Resistance: 1.6ohms
Inductance: 3.2mH ± 20%(1KHz)
Gearbox Type: Planetary
Gear Ratio: 5 : 1
Backlash at No-load: <=15 arcmin
Max. Permissible Torque: 3.5Nm(495.6oz.in)
Moment Permissible Torque: 6Nm(849.7oz.in)
Max. Radial Load: 150N
Ambient Temperature: -10 – 90℃
Insulation Class: B
Noise: <=50 dB
Life: 20000 h
Framework Size: 42 x 42mm
Motor Length: 39mm
Gearbox Length: 41mm
Shaft Diameter: Φ8mm
Shaft Length: 23.5mm
Key-way Length: 14mm
Number of Leads: 4
Lead Length: 320mm
Replaced by the 3325_0, a motor with the same NEMA size and same torque.
This NEMA-17 motor comes with an integrated Planetary gearbox with a 52/11 :1 ratio. It creates 16.2 Kg-cm of torque at 1.68 Amps.
When connected to a 1067 – EP, the 3317 has a maximum swiftness of a little over 900 RPM. At the result of the gearbox, the step angle is a little under 0.35°. When using the step position in calculations, you should derive the specific step position by dividing 1.8° by the gearbox reduction ratio.
This particular revision of the 3317 is made by a different manufacturer, but should behave very much like the revision 0 version.
Brother Gearmotors NEMA C-Face Speed Reducers
The gears in these NEMA C-Face speed reducers are high strength, free of maintenance and will be mounted in virtually any path with their slip fit “O” ring design. Low to high decrease ratios, flange attach or foot mount types, right angle or hollow shaft right angle types available. Suit NEMA C-Encounter AC motors, brushless DC motors and brushed DC motors.
For 1/2 HP up to 3 HP Motors
NEMA C-Encounter, 140TC and 180TC input flanges
Inline Helical Gear Swiftness Reducers
Right-Angle Hypoid Gear Speed Reducers
Downloads & Reference
NEMA C-Face Velocity Reducers Lineup
Maximum Input Speed
NEMA 56C Speed Reducers
NEMA C-Face Speed Reducers
Parallel Shaft (Foot Attach)
5:1 ~ 200:1 3600 r/min
Parallel Shaft (Flange Attach)
Right-Angle Hollow Shaft
5:1 ~ 240:1
Right-Angle Solid Shaft
5:1 ~ 240:1
*Torque and Speed vary based on insight voltage and frequency, please review item specifications for details.
Compared to a spur equipment of around the same pitch diameter, Helical gears may transfer high loads in greater speeds. That is due to the gradual engagement of the teeth and even transfer of the load.
Lightweight and Compact
Die cast aluminum gear housings make these quickness reducers light in weight, allowing engineers to design less expensive mounting provisions
High-quality synthetic grease is used in every gearboxes. They are filled at the factory , nor need maintenance filling or level checks. This saves precious time at set up and eliminates concern for pricey oil disposal required by the EPA.
Mount in virtually any Direction
These gearboxes are sealed with machine “slip” fit “O” rings and double lip spring shaft seals on both motor and input shaft and output shaft driver. Thus, the gear motors can be mounted in virtually any conceivable path without concern for the position of a breather plug.
NEMA Result Flange Planetary Gearboxes, Max. Ratio 1000:1
Frame Size:42.6/60/90/115/145 mm
Nominal Output Torque:8~215 N.m
Nominal Input Speed:2500~4000 rpm
Max. Input Speed:5000~6000 rpm
Backlash:12~15 arcmin, three stages, 6~9 arcmin, single stage, 8~12 arcmin, two stages
Noise Level:60~67 dBA/1m
The Ever-Power EP Series gearboxes are equipped with a NEMA output flange with metric shaft, to provide exceptional torque ratings and capacity for many of present servo and stepper movement control applications. The gearboxes are drop-ins for some industry standards and offered from one to three stages with ratios 3:1 up to 1000:1, the best backlash of < 6 arc-mins. Adapters for all servo and stepper motors.
5 frame sizes with NEMA 17, 23, 34, 42, 56 flange and metric shaft
Backlash as low as 6 arc-minutes
Ratios up to 1000:1
High radial and axial loading capacity
20,000 hours service life
Synthetic grease, free of maintenance
Reliable operating performance, affordable integration