rotary cutter gearbox
Replacement Rotary Cutter gearbox, 40hp rated, 1-3/eight”-six spline enter shaft, one.57″ X 12 tapered spline output shaft and 1:1.forty seven velocity up ratio.
These gearboxes have a square housing configuration and are equivalent in mounting and ratio to the spherical configuration gearboxes.
These are original equipment gearboxes
This gearbox will not suit the IM400, IM500 and IM60 types as they have a clean input shaft!
Assess with comparable products
rotary cutter gearbox
Substitute Rotary Cutter gearbox, 40hp rated, one-3/eight”-six spline input shaft, 1.fifty seven” X 12 tapered spline output shaft and one:1.forty seven velocity up ratio. These gearboxes have a square housing configuration and are equivalent in mounting and ratio to the round configuration gearboxes. These are original gear gearboxes on the IM402, IM502 and IM602 series rotary cutters which highlighted slip clutch PTO shafts. This gearbox will not fit the IM400, IM500 and IM60 designs as they have a clean input shaft! If your gearbox has a twelve spline output shaft and a 1-3/8″ – 6 spline enter shaft this gearbox will work. Bolt sample is four-three/4″ on middle gap to gap and six-3/4″ center to center of bolt hole on diagonal. The mounting holes sort a square bolt pattern.
rotary cutter gearbox
RC-twenty Sequence
Specifications
Torque: one,750 – three,267 lb.-in.
198 – 369 Nm.
Ratios: one:2.5, 1:two.83
Seals: Triple Lip Spring Loaded
Bearings: Deep Groove Ball
Oil Cap: 16 oz. (.47 L)
Excess weight: 34 lbs. (fifteen.four kg)
Programs
Finishing Mowers Rotary Cutters
Rotary Slashers Toppers
RC-27 Series
RC-thirty Collection
Specifications
Torque: 2,800 – four,667 lb.-in.
316 – 527 Nm.
Ratios: 1:1.forty seven, 1:one.71, 1:1.93
Seals: Triple Lip Spring Loaded
Bearings: Deep Groove Ball
Oil Cap: 23 oz. (.sixty eight L)
Fat: fifty one lbs. (23.one kg)
Purposes
Ending Mowers Rotary Cutters
Rotary Slashers Toppers
RC-51 Series
Specifications
Torque: 
2,800 – four,667 lb.-in.
316 – 527 Nm.
Ratios: one:one.47, one:1.71, one:1.93
Seals: Triple Lip Spring Loaded
Bearings: Tapered Roller/ Deep Groove Ball
Oil Cap: 27 oz. (.80 L)
Fat: 56 lbs. (twenty five.four kg)
Applications
Rotary Cutters Rotary Slashers
Gears: Accessible with both straight bevel or spiral bevel gearing.
Power: Hp & Torque based mostly on AGMA formula for constant responsibility furthermore a provider or load class factor.
Shafting: Numerous dimensional, metallurgical, and heat-handle options accessible.
Bearings: Geardrives obtainable with numerous bearing existence options.
Lubrication: Drives accessible with numerous lubes based on running characteristics
If rotary cutter gearbox thrills you, after that you could be curious about our web site