Small Precison Worm Decrease Gearboxes
There are many of specifications you will have to consider when coming up with a worm gearbox selection.
First, what’s the input and output torque requirements? Next, verify vendor horsepower/torque charts and select the correct worm gear reducer.
If the size of the gearbox will probably be an important consideration then check the reducer dimension specifications, not all producers make compact units. In fact, working with the proper supplier can help you not only find the right equipment reducer but also prevent some of the most typical errors in reducer selection. We provide a free guide to assist you find the right supplier to utilize.
For low and fractional horsepower application we offer two sizes of worm gear reducer, the SW-1 and the SW-5. Size and torque output are the major variations between both of these models. Both feature either a hollow or solid output shaft. Both models are compact and provide users a wide variety of ratios, including:
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Understanding the specifications of your particular application or task is essential to selecting the correct worm gearbox.
Precision, 6:1 to 100:1 ratios, torque 1 to 10 Nm and multishaft arrangements
M1, M2, M3
Metric Worm Reduction Gearboxes
Small precision with multi-shaft arrangements
• 6:1 to 100:1
• Torque 1 to 10 Nm
• Drilled and tapped mounting holes at the top and bottom
• Flush fitting bearing caps simple to install
• Input shafts installed on precision ball bearings
• Max. input speed 10000rpm
• Anti backlash version available
Additional Range:
Neckar Worm Gearboxes Type S – 4 sizes available
Smallest gearbox specifications:
• 5:1 to 60:1
• Output Torque: 1.4-2 Nm
• Aluminium housig
• Special steel worm wheel
• Max. load capability of output shaft 100N radial, 50N Axial
• Max. input speed 5,000 rpm
• Weight: 0.225kg
Where are Right Angle Worm Gear Motors Used
Anywhere a concise dual shaft gear motor or single shaft gear motor is necessary. This right angle equipment motor is so versatile it could work just about anyplace.
Features & Options
Double Shaft or One Shaft
Hollow Shaft
Maximize Torque in a little Package
Wide Gear Ratio
Cost-Effective
Compact Size
Specifications
Rated Torque: 55.3 – 700 g-cm
Rated Speed: 4710-5900 rpm
Rated Current: 240 – 5500 mA
Gear Ratios: 1:50 – 1:1050
Using miniature gears, Ever-Power has designed and built exclusive, high precision mini gearboxes that can’t be found anywhere else. Our miniature gearboxes are available in many configurations, which includes worm and wheel, cross axis helical, bevel, inline spur, and more. We can also provide customized micro gearboxes that were created and built to meet your unique specifications.
E mail us for the mini gearbox your application requires, or demand a quote upon a custom micro gearbox.
Micro Gearbox Options
Gearboxes are also known as reducers, gear reducers, rate reducers, equipment drives, and gearmotors. All conditions can be used pretty much interchangeably. Please be aware that the links for our little gear drives include information on the full selection of body sizes for that series or design.
Bevel Box Micro Gear Drive
Our bevel box miniature equipment drives are application rated for the the best balance of overall performance and cost. Torque can be balanced to meet up your RPM and working life requirements. Lightweight with low backlash efficiency (as little as 1°, with option of 1/2”).
Result torque: up to 7 oz.-inches
Low backlash: ≈1°, option of 1/2”
Rated for input boosts to 2,000 RPM
Temperature range: -5° to 175°F (-20° to 79°C); optional to -40°F (-40°C)
Cross Axis Helical Miniature Gearbox
Ever-Power miniature cross axis helical gearboxes provide relatively high amounts of thrust in a compact package. They provide an output shaft at 90° from the input, and so are obtainable in gear ratios from 1:1 to 40:1. Lightweight but long lasting, with machined aluminum housings and hardened alloy steel gears.
High efficiency: up to 88% at 1,000 RPM
Low backlash: as low as ≤30 arc minutes
Rated for input speeds up to 4,000 RPM
“Left hand” models available
Miniature 2 Shaft Worm Gearbox
Our miniature 2 shaft worm gearmotors are engineered for ≤30 arc moments of backlash or better. Also known as “shaft to bore gearboxes,” the unit provide a single input shaft that protrudes from reverse sides of the casing; output is certainly a keyed bore. Standard single- and double-end shafts are available and supplied with keys and retainer rings. An array of equipment ratios and insight sizes can be found to meet your needs.
High efficiency: up to 86% at 1,000 RPM
Low backlash: ≤30 arc small worm gearbox minutes or better
Available in ratios from 5:1 to 120:1
Rated for input speeds up to 3,000 RPM
Miniature 4 Shaft Worm Gearbox
Every miniature 4-shaft worm gearbox from Ever-Power features precision-machined hardened metal gears, solid aluminium housings, and permanent lubrication. They provide two input shafts on reverse sides of the frame, 
with two output shafts perpendicular to the insight shafts. Our mini 4 shaft worm equipment drives deliver high effectiveness efficiency with low backlash.
High efficiency: up to 82% at 1,000 RPM
Low backlash: less than ≈2°
Available with gear ratios from 1:1 to 32:1
Rated for input boosts to 4,000 RPM
Miniature Flange Worm Gear Drive
These micro flange worm gearboxes generate an output at 90° from the input. They deliver superior efficiency in a wide variety applications and are built with small footprints, making them perfect for operations where space is bound. They offer high effectiveness with low backlash.
Gear ratios from 6.66:1 to 80:1
High efficiency: up to 83% at 1,000 RPM
Low backlash: only ≤4°
Max. input speed: 3,000 PRM
DC motor option available
Miniature Inline Spur Gearbox
Specifically engineered for encoder applications, Ever-Power’ micro inline spur gear drives can be found in two frame sizes, and so are rated for speeds up to 3,000 RPM. Aluminium housings and stainless gears and shafts make these inline spur gearboxes hard and corrosion resistant, for your many demanding applications.
Output torque: up to 125 oz.-inches
Low backlash: as little as 15 arc minutes
Available with equipment ratios from 4.96:1 to 3600:1
Optional synchro cleats available
Compact Wormwheel Gearbox
These miniature correct angle worm gear reducers deliver superior performance with high efficiency, and show rugged construction for challenging power transfer functions. Available in three gear ratios (5:1, 10:1, 20:1), our compact worm gearboxes are built in extremely compact footprints for applications where space is limited.
90° output angle
Gear ratios: 5:1, 10:1, and 20:1
Up to 12.5 inch-lbs. of output torque
Max. input speed: 3,000 RPM
Compact footprint: 1.5” x 1.5” x 1.08”
Custom Miniature Gearbox
Ever-Power can engineer and manufacture a customized miniature gearbox to meet your unique specifications. We can produce customized micro gearboxes in any configuration your application requires, with output torque amounts as high as 900Nm. We can work from your own gearbox styles, reverse engineer an existing unit, or help you develop an all-new style that delivers the performance you need. Ask for a quote on a custom made miniature gearbox or contact us to discuss your unique requirements.
The Ever-Power Advantage: Small is No Big Problem
Broadest selection of small gear reducers
Greased for life
Ruggedly built
Modifications and particular ratios available
Custom small gearboxes designed to suit
Input & Output Shafts
Input and output shafts with drive crucial and retainer rings can be supplied to your specs for any of our hollow bore miniature gearboxes. We offer a basic selection of solitary ended or double ended shafts to assemble in these gearboxes. All gearbox shafts are supplied with keys and retainer bands.
For P and PF series worm and wheel gearboxes make use of our P/PF gearbox shafts.
For Electronic series crossed axis helical gearboxes use our Electronic gearbox shafts.
For F series spur gearboxes, contact our app engineers to go over your particular needs.
We provide a broad selection of misalignment shaft couplings in in . and metric bore sizes. In . and metric precision surface shafts can be found from stock.
Contact Us for High Performance Miniature Gearboxes
We will be the miniature gearbox experts. Our micro gear drive models deliver superior efficiency in a little footprint, and are rugged enough for challenging work environments. Contact us to find out more about our mini gearboxes, or ask for a quote on a customized model that’s tailored to your preferences.
Additional benefits of worm drive gearboxes include:
