One reduction worm gearing offers high ratio reduction with few shifting parts in a close-coupled small drive. The right angle set up of driving-to-driven machine takes a minimum of space. Input and output shafts can be prolonged in either or both directions in horizontal or vertical plans adaptable to any installation requirement. Efficient electric motor speeds are reduced to sluggish speed requirements of several industrial machines in one reduction.
Product Features
Ratios 5:1 to 70:1
Hollow & Solid Output Shafts
Vertical & Horizontal Mounting
Fan Cooled (Standard)
Motor Mounts (C-Encounter Adapters or Scoops)
Cast Iron or Steel Housings
Products
The exclusive utilization of the involute Helicoid Thread form (with departing side contact) on the worm and gear provides for high efficiencies, and lengthy service lifestyle. The hardened surface and polished alloy steel worm develops a smooth, work hardened surface on the bronze gear. For this reason worm gears put on in and improve with prolonged service while additional gears are deteriorating. worm gear speed reducer Ever-Power offers a broad selection of model configurations, sizes, ratios, and add-ons from our standard products.
Fabricated Designs
If your application involves serious shock loads or possible housing damage from external sources (as in steel mills or mobile tools applications) Ever-Power can provide fabricated steel housings with up to a 48″ center distances. Fabricated housings provide optimum rigidity and strength that allows the tranny of higher horsepower levels than are possible with standard cast iron units. Extra heavy side plates connect the worm and equipment shaft bearing facilitates, assuring correct meshing of the apparatus under all load conditions. In smaller sized sizes, fabricated steel reducers are interchangeable with Ever-Power standard cast iron reducers.
Custom Designs
Ever-Power can provide custom speed and reversed engineered reducers for the application, be it a new project or a primary drop-in replacement for a competitor’s velocity reducer. Fabricated steel reducers allow Ever-Power to match a competitor’s footprint, centerline, and shaft height allowing a direct drop-in alternative saving the customer time and money.
Long – Quiet Life
All worm gears in Ever-Power reducers are manufactured from phosphorous bronze. Our style also includes a hardened, ground and polished alloy metal worm. This mixture develops a easy, work-hardened mating surface area of the bronze gear which increases with prolonged service.
Worm gearing is a course of gear reducers that utilizes right angle, nonintersecting shafts. This style of reducer provides smooth and quiet operation and allows for the likelihood of large velocity reductions. These gears can be found from share in a wide selection of ratios, from only 4:1 to as much as 3600:1. The compact design and structure allows worm equipment reducers to be positioned in a relatively small space. Thus, very high reductions in a restricted package size may be accomplished with this configuration. Our worm gear features the constant sliding tooth action between worm and one’s teeth. This escalates the tolerance for heavy loads and shock loads. Worm gear drives offer users high reducing capacity for relatively low cost when compared to various other types of gearing.
The use of worm gearing extends across many industries including food, beverage and grain and has many applications. Some applications that utilize worm gearing are: conveyors, mixers and bucket elevators.
Ever-Power worm gear reducer gearbox series bottom on years of experiences uses designed teeth surface with unsurpassed torque transfer overall performance with great overall performance, efficency and price.Worm gear system transmits power through sliding get in touch with, resulting in extremely low vibration , sound, small backlash and self-locking property
-Housing:One time we casting creats great rigidity for severe impacts. Outer cooling fins and inner lubrication oil diversion channel design to improve heat dissipation.
-Worm Shaft: Manufactured with Carbon alloyed Metal S45C or SCM415, precison machined and carburized to HRC45 or HRC60, then for precision tooth grinding to make sure maximum contacting.
-Worm Wheel: Manufactured with Carbon alloy ALBC2, teeth are machined by precision CNC hobbing machine to sustain high impact.
A worm gear reducer is one type of reduction gear package which contains a worm pinion insight, an output worm equipment, and features a right angle output orientation. This type of reduction gear box is normally used to take a rated motor acceleration and produce a low speed result with higher torque worth based on the reduction ratio. They often times can solve space-saving problems since the worm equipment reducer is one of the sleekest reduction gearboxes available because of the small diameter of its result gear.
worm gear reducerWorm equipment reducers are also a popular type of rate reducer because they provide the greatest speed decrease in the tiniest package. With a higher ratio of speed reduction and high torque output multiplier, it’s unsurprising that many power transmission systems utilize a worm equipment reducer. Some of the most typical applications for worm gears are available in tuning instruments, medical examining equipment, elevators, security gates, and conveyor belts.
SW-1 and SW-5
Torque Transmission offers two sizes of worm equipment reducer, the SW-1 and the SW-5 and both are available in a range of ratios. The SW-1 ratios include 3.5:1 to 60:1 and the SW-5 ratios include 5:1 to 100:1. Both of these options are produced with tough compression-molded glass-fill up polyester housings for a long lasting, long lasting, light weight speed reducer that is also compact, non-corrosive, and nonmetallic.
Features
Our worm gear reducers offer a choice of a good or hollow output shaft and show an adjustable mounting placement. Both SW-1 and the SW-5, nevertheless, can endure shock loading much better than other reduction gearbox designs, making them well suited for demanding applications.
Rugged compression-molded glass-fill polyester housing
Light weight and compact
Non corrosive
Non metallic
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Grease Lubrication
Solid or Hollow output shaft
Adjustable mounting position
Worm Equipment Reducers also known as worm gearbox or worm swiftness reducers. Worm gear reducers are utilized for speed reduction and raising the torque for electric powered electric motor drives. You can choose to install your NEMA motor to the reducer utilizing the NEMA C face flange or use a coupling. If you need a coupling for the output or input shaft discover our coupling section for choosing the coupling. We offer four assemblies left hand and right hand and double result shaft and shaft insight and shaft output. Interchangeable with most worm gear manufactures. Find data sheet in product overview for diamensions. If you don’t see your type, make sure you Contact Us.
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Design for OEM Replacement
Double Bearings Applied to Both Shaft Ends
Anti-Rust Primer Applied Outside and inside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Metal Shafts
Flange Mount Versions for 56C and 145TC Motors
Ever-Power DDVM series triple-reduction worm gear quickness reducers can be found in ratios from 5000:1 to 175,000:1 and middle distances from 7” to 20” (larger sizes on request). Output torque ranges from 33,000 in pounds. for the 7” CD DDVM-70 to 582,900 in pounds for the DDVM-200. Mechanical HP input requirements are from 0.09 HP for the 175,000:1 7 in CD reducer to 6.25 HP for the 5000:1 20” CD unit. These reducers can be found in four configurations: horizontal, vertical, shafted, and shaft installed.
These reducers are well suited for water/waste-water gear drive applications such as for example thickeners and clarifiers, which require a vertical down shaft. 
Other offered configurations also make Ever-Power triple decrease reducers perfect for use on mixers, elevators, solar power panels, astronomical telescopes, indexing tables, hoists, conveyors, or various other process or materials handling systems where large torques/gradual speeds are needed.
These reducers are also offered with a helical major reduction stage and so are termed the HDVM series
Product Features
Ratios 5000:1 to 175,000:1
HP from 0.09 to 6.25.
Output Torque to 583,000 in lbs.
Output RPM as low as 0.01 with a 1750 RPM input.
Ideal for ultra-slow rate, high torque applications
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Style for OEM Replacement
Double Bearings Used on Both Shaft Ends
Anti-Rust Primer Applied Outside and inside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Steel Shafts
Flange Mount Versions for 56C and 145TC Motors
Description
The HDR Series worm equipment reducers are used in low to moderate horsepower applications to lessen speeds and increase torque. Worm gear reducers can be found in direct or indirect drive, direct drive versions are 56C or 145TC flange mount with either right, left or dual output shafts or a hollow bore output. The indirect drive models are shaft input-shaft result boxes for use with sprocket or pulley drive systems. They offer an effective low priced solution to speed decrease and increased torque, with higher tolerances for shock loading than helical gear reducers.
In order to decide on a gearbox speed reducer, you will need to determine the mandatory torque and support factor for the application form. Click on “Specs” above for a table that will aid in identifying the service element. For service factors above 1.0, multiply the required torque by the support factor.
Our standard 700 Series – the heart of Ever-Power velocity reducer products – has been serving industry reliably for over 40 years. Its tested modular style has set the market standard for performance and may be the most imitated product in today’s worm gear velocity reducer market. But why accept a knock-off when you can have the initial – from Ever-Power.
Specifications
11 basic solitary reduction sizes
8 basic double reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow output shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow output bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in stock)
Product Features
The 700 Series’ large oil reservoir provides efficient heat dissipation and lubrication for longer operating existence.
Its multi-position mounting versatility allows for installation in virtually any position.
Housings are straddle-milled, best and bottom level, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged housing, fabricated of fine-grained, gear-quality cast iron, provides optimum strength for optimum durability, as well as greater precision during worm and gear alignment.
Ever-Power 700 Series high-strength bronze worm equipment is straddle mounted between heavy-duty tapered roller bearings to increase thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel result shaft assures convenience of high torque and overhung loads.
Pipe plugs allow easy fill, level, and drain in any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal life.
Both 2D and 3D CAD drawings are available in our eCatalog.
TheIncreased Quality! Industrial Rated! Inexpensive!One-piece gearcase, without external ribs, is constructed of close-grained cast iron and provides for rigid equipment and bearing support. In addition, it offers excellent temperature dissipation.Dual lip, spring-loaded seals guard against oil leakage and prevent dirt from entering.Stepped shafts with oversized ball andtapered roller bearings.Carbon metal shafts for greater power.High tensile strength cast bronze worm wheel and hardened and surface alloy steel worm made intregal with the shaft for long and trouble-free life.Oil sight gauge for simple maintenance (unavailable on sizes 25 and 34).Factory oil stuffed.Every unit test run just before shipment.Universal installation with bolt-on feet.Highly modifiable design.All this at substantially reduced prices than you have been accustomed to spending money on reducers of lesser quality. Less
